AI News

SWANCOR Advanced Materials Bets on Consumer-Grade Robots: Share Price Hits Record High, Market Cap Tops 95 Billion Yuan, Q3 R&D Investment Surges 2305.34% Year-on-Year

36Kr · AIUpdated Nov 12 00:18

AI summary

On November 11, SWANCOR Advanced Materials' intraday share price once rose to 244.2 yuan per share, hitting a record high, with a closing market cap of 96.932 billion yuan; the company's third-quarter R&D investment was 204 million yuan, a year-on-year surge of 2305.34%, mainly directed toward its consumer-grade embodied intelligent robot business. This business has not yet recognized revenue, and the third-quarter loss was 255 million yuan, a year-on-year decline of 933.49%; the company said revenue from consumer-grade embodied intelligent robots accounts for a relatively low proportion of total revenue. The "Qiyuan Q1" and "Qiyuan T1" released in September have cumulatively rolled off the production line, reaching 10,000 units.

Body · AI translation

Shares of SWANCOR Advanced Materials (688585.SH), a hot concept stock in humanoid robots, have continued to surge recently. On November 11, the stock rose as high as 244.2 yuan per share during intraday trading, hitting a record high; it closed at 240.31 yuan per share, up 9.8%, with a latest market capitalization of 96.932 billion yuan.

On November 9, SWANCOR Advanced Materials issued a risk warning announcement stating that its share price had cumulatively risen more than 100% recently, with a price-to-earnings ratio of 1,767.36 times, significantly higher than the industry average. The company's consumer-grade intelligent robot business is in an early stage of development and in the ramp-up phase of large-scale mass production and commercialization validation, and there are risks such as production capacity ramp-up falling short of expectations and fluctuations in yield rates.

SWANCOR Advanced Materials also stated that the company's operating revenue mainly comes from its new materials business, and revenue from consumer-grade embodied intelligent robots accounts for a relatively low proportion of total revenue.

Last July, AgiBot obtained control of SWANCOR Advanced Materials through a holding platform jointly funded by it and its core team, using a combination of "agreement-based transfer + tender offer." Subsequently, corresponding investment began to increase. SWANCOR Advanced Materials' financial report for the third quarter of this year shows that R&D investment reached 204 million yuan, a surge of 2,305.34% year-on-year, mainly for the consumer-grade embodied intelligent robot business. In September this year, SWANCOR Advanced Materials launched the consumer-grade embodied intelligent robots "Qiyuan Q1" and "Qiyuan T1," which have now cumulatively rolled off the production line up to 10,000 units.

On the one hand, investment is increasing rapidly; on the other hand, the embodied intelligent robot business has not yet substantially driven performance growth. This cross-industry company, which has attracted considerable market attention, is still waiting for a commercialization inflection point. On November 10, a reporter from Time Weekly called SWANCOR Advanced Materials multiple times about related issues, but no one answered.

"Before truly achieving commercialization, there will be a period of continuous investment, and the humanoid robot industry itself will also undergo resource optimization. Risks exist during this period," Ma Houchuan, a partner at Darongshu Investment, told a Time Weekly reporter.

Betting on humanoid robots, R&D investment surges

R&D investment is a microcosm of SWANCOR Advanced Materials' push into the robot business.

From 2022 to 2024, the company's overall annual R&D investment remained at around 30 million yuan. R&D investment was relatively high in 2022, at 33.244 million yuan; in 2024, R&D investment declined slightly, totaling 30.3478 million yuan.

In 2025, SWANCOR Advanced Materials began to increase R&D on consumer-grade robots. In September of the same year, AgiBot completed the share transfer registration procedures, Zhiyuan Hengyue became the controlling shareholder of SWANCOR Advanced Materials, and Deng Taihua became the actual controller. Later, upon a board resolution, Peng Zhihui became chairman of SWANCOR Advanced Materials.

In its 2025 annual report, when introducing new non-core businesses, SWANCOR Advanced Materials stated that during the period the company actively explored the consumer-grade embodied intelligent robot business, focusing on personal and household scenarios and specializing in small-sized robots with core features such as full-body force control, flexible impedance control, and multimodal interaction. Product development prototypes were unveiled at CES 2026; at that time, the business was still in the R&D stage, had not yet achieved large-scale sales, and had not generated revenue or profit.

In August this year, SWANCOR Advanced Materials announced that AgiBot Innovation is one of the company's indirect shareholders, and that its production and operations, core technology development, and other matters are independent from the company. As chairman, Peng Zhihui does not hold any senior management position or other administrative position at SWANCOR Advanced Materials and does not participate in specific R&D work.

The related R&D investment growth trend is even more significant. In the first half of this year, SWANCOR Advanced Materials' total R&D investment was 180 million yuan, up 738.66% from the same period last year, accounting for 22.46% of total revenue. Among this, R&D investment in the consumer-grade embodied intelligent robot business was 160 million yuan, accounting for about 90.92% of R&D investment.

In the third quarter of this year, SWANCOR Advanced Materials' R&D investment accounted for 50.23% of revenue, an increase of 48.52 percentage points year-on-year, the highest in nearly five years.

"Front-loading R&D investment is a common phenomenon in the early stage of the humanoid robot industry's development," Luo Lan, an analyst at Tuorui, told a Time Weekly reporter. Whether a company continues to lose money depends on R&D efficiency, cost control, and order conversion.

SWANCOR Advanced Materials' high R&D investment has had a direct impact on the company's profit. Last year, the company's key performance indicators showed a declining trend, but net profit and operating cash flow remained positive. In the first quarter of 2026, SWANCOR Advanced Materials began to report losses, with net profit attributable to the parent company posting a loss of 41.0686 million yuan, down 282.12% year-on-year; net cash flow from operating activities was 2.1048 million yuan, down 97.96% year-on-year.

The company said the decline in profit was mainly due to an increase in R&D investment during the reporting period compared with the same period last year. At the same time, affected by rising shipping costs, fluctuations in the prices of some raw materials, and intensifying industry competition, the gross profit margin on sales of some products declined compared with the same period last year.

In this year's semi-annual report and third-quarter report, SWANCOR Advanced Materials continued to report losses, with the third-quarter loss reaching 255 million yuan, down 933.49% year-on-year. SWANCOR Advanced Materials again mentioned that the consumer-grade embodied intelligent robot business has not yet recognized revenue, and increased R&D and marketing investment in related businesses caused the company's total profit, net profit attributable to the parent company, and other indicators to decline year-on-year.

The commercial application market remains to be truly opened

The development prospects of humanoid robots are sparking more discussion.

Ma Houchuan told a Time Weekly reporter that in recent years, primary and secondary markets have been booming, and robot company valuations are generally high. He believes that the deployment of humanoid robots is still at an early stage, and that there is still an obvious gap before large-scale application, whether in manufacturing costs or the practical performance of robots.

“Various robot sports events and boxing performances are more meaningful as demonstrations of humanoid robot performance.” He analyzed that the commercial application market for humanoid robots has not yet truly opened up, and the root cause is that manufacturing costs, model training, practicality, and other factors have not yet truly reached an inflection point.

Ma Houchuan further explained that humanoid robot hardware still needs further optimization and cost reduction, and the various types of lead screws at the joints of dexterous hands are the main direction for cost reduction. At present, the industry's technical routes have not yet been fully consolidated, and multiple routes are still being explored.

Regarding the difficulties and challenges of commercializing consumer-grade humanoid robots, Luo Lan told a Time Weekly reporter that difficulties such as insufficient cross-scenario execution capability, a mismatch between price and actual use, security and privacy issues, and the fact that demand in home scenarios still needs to be verified all remain to be solved.

IDC data shows that in the first half of 2026, applications in scenarios such as scientific research and education, performance and display, and government data collection together accounted for 69% of global humanoid robot shipments. This data reflects the current shipment structure of the industry. Whether home demand can reach scale will also depend on usage frequency, willingness to purchase, and after-sales service costs.

Ma Houchuan also told a Time Weekly reporter that more than half of Unitree Robotics' shipments are used in scenarios such as universities and research laboratories, and have not yet entered people's lives.

Although commercial deployment is still some distance away, suppliers in the upstream part of the industrial chain with core competitive advantages will see business expansion as the overall market grows. Ma Houchuan said that amid an overall contraction in investment, the humanoid robot industry will undergo further consolidation, and the industry will also concentrate toward some high-quality leading enterprises and companies specializing in niche fields.

Fulai New Materials, a new materials company related to dexterous hands, has recently seen its stock price rise. However, the robot-related “electronic skin” business operated by the company has likewise not yet generated scaled revenue.

While acknowledging that industry risks exist, Ma Houchuan believes that humanoid robots have very broad prospects, and that in the future the number of humanoid robots in use will certainly be astonishingly large. “Any technological innovation must go through a ‘dark period’ of high costs. Looking back at new energy vehicles, their development path of exploration, start-up, development, and rapid scaling is very representative,” he said.

This article comes from the WeChat public account “Time Weekly” (ID: timeweekly), author: Liu Juan, editor: Guo Ruyi, published with authorization by 36Kr.

Source

36Kr · AI