AI News

Fujifilm to invest about 10 billion yen to expand LTO tape production, as AI data archiving demand drives tape revival

Phoenix TechnologyUpdated Nov 7 17:04

AI summary

Fujifilm announced it will invest about 10 billion yen in the 2026 to 2028 fiscal years to expand its Odawara plant, raising data storage tape production capacity to five times the fiscal 2025 level, with a focus on producing LTO Ultrium 10 tape; this is the largest investment in a dedicated LTO tape facility in nearly 20 years. Data from the LTO Consortium shows that global tape shipment capacity in the first quarter of 2026 grew 57% year on year, and shipment capacity in 2024 reached a record 176.5 EB. A single LTO-10 cartridge has a native capacity of 40 TB, with a theoretical maximum of up to 100 TB at a 2.5:1 compression ratio.

Body · AI translation

The cassette tapes forgotten by young people are quietly making a fortune in the AI era APPSO November 07, 2026 15:51:42

On October 29, Fujifilm of Japan announced an investment of approximately 10 billion yen (about 422 million yuan), planning to expand its Odawara plant in Kanagawa Prefecture during fiscal years 2026 to 2028, raising data storage tape production capacity to five times that of fiscal 2025, with a focus on producing the latest generation of LTO Ultrium 10 tapes.

According to Fujifilm, this is the largest investment in dedicated LTO tape facilities in nearly 20 years, and the main driver behind the expansion is precisely the massive data archiving demand brought about by generative AI.

A classic joke circulates in the computer industry.

Computer scientist Andrew Tanenbaum once said that you should never underestimate the bandwidth of a station wagon full of tapes hurtling down the highway. It sounds a bit absurd, but when the data to be transferred reaches the petabyte or even exabyte level, loading storage devices onto trucks may indeed be more efficient than transmitting over a network.

In 2016, Amazon AWS launched the Snowmobile service, using heavy trucks to transport large storage devices directly, moving up to 100PB of data at a time.

Although Snowmobile did not transport tapes, and the service was discontinued in 2024, it illustrates a long-standing problem. When data reaches a certain scale, how to preserve and move it at a reasonable cost is itself an engineering challenge.

Training large models requires GPUs, HBM and high-speed SSDs, but after training ends, enterprises are left with raw corpora, cleaned datasets, training logs, model checkpoints, and historical versions generated through continuous iteration.

Among these, data actively involved in computation requires high-speed storage devices, frequently accessed large-scale datasets can be placed on hard disk drives, and materials that will not be used for months or even years but cannot be casually deleted are suitable for long-term archiving systems.

The industry usually refers to infrequently accessed data as cold data.

The problem follows. As data accumulates, should all hard drives be kept powered on, spending money to maintain files that may not be accessed once in several years?

Magnetic tape happens to be good at this.

First, it is cheap and power-efficient. Tapes can be stored offline for long periods, require no continuous power when idle, and do not need to keep equipment running and cooled like online hard drive arrays.

Fujifilm once calculated that under specific conditions of preserving 100PB of data over a ten-year period, an automated tape system can reduce total cost of ownership by about 86% and carbon emissions by about 95% compared with an all-hard-drive solution.

Second, it is secure. Tapes can be removed from the system and stored offline; even if servers are attacked by ransomware, physically isolated tapes still have a chance to retain an independent backup.

Moreover, modern tapes are not as slow as imagined. LTO-10 has a maximum raw continuous transfer rate of up to 1200MB/s, and automated tape libraries can also use robotic arms to complete loading and reading.

However, tapes need to locate data sequentially, and randomly reading a single file may take a long time, so they are not suitable for frequent access and real-time computing. If SSDs in AI data centers are responsible for making data available on demand, then tapes are more like a low-cost, massive-capacity digital warehouse.

In fact, the scientific community has long been using this solution.

In December 2025, CERN announced that the Large Hadron Collider had cumulatively preserved 1EB of experimental data, equivalent to 1 million TB, most of which is stored on about 60,000 tapes.

Experimental data collected decades ago may regain research value due to the emergence of new theories. CERN estimates that the scale of data that will need to be preserved and processed in the next decade will reach about ten times the previous cumulative storage volume.

The growth of the tape market is already supported by actual data.

According to data released by the LTO Consortium in September 2026, global LTO tape shipment capacity reached a record 176.5EB in 2024, up 15.4% year on year. Although it declined somewhat in 2025, it still reached 160.3EB.

Entering the first quarter of 2026, with the launch of LTO-10 and growing archiving demand, global tape shipment capacity grew 57% year on year. What is counted here is the storage capacity provided by tapes, not tape cartridge sales.

A single tape can store 100TB, with capacity surging 400-fold in 26 years

When ordinary consumers thought tape technology had long stagnated, engineers have actually been continuously increasing its storage density.

In June 2025, Fujifilm launched the LTO-10 30TB data tape, and in December of the same year released a 40TB version, which began shipping in 2026. The latest product has a raw capacity of 40TB per cartridge, and if calculated at an ideal compression ratio of 2.5:1, the theoretical maximum capacity can reach 100TB.

Image | LTO-10 30TB

By comparison, the first-generation LTO tape launched in 2000 had a raw capacity of only 100GB. In just 26 years, the capacity of a single cartridge has increased by a full 400 times. However, 100TB is the theoretical compressed capacity; for video, images, and model weights that have already been compressed, the actual capacity typically cannot reach this figure.

Even more interesting is that the LTO-10 tape cartridge is only about 10 centimeters square and 2.15 centimeters thick, yet inside it is wound 1,337 meters of tape, equivalent to more than three laps around a standard athletics track.

To fit 1,337 meters of tape into a cartridge only about 10 centimeters square, Fujifilm introduced aramid film and new thin-layer manufacturing technology, reducing the overall thickness of the tape to just 4 micrometers, while adopting ultrafine magnetic particles combining barium ferrite and strontium ferrite technologies to increase the amount of data that can be recorded per unit area.

As for the storage principle, it is actually in the same lineage as the audio tapes of decades ago.

The tape surface is covered with tiny magnetic particles. When writing data, the head records digital information by changing local magnetization states; when reading, it detects changes in the magnetic field and restores the data through decoding and error correction.

Modern LTO tapes use linear serpentine recording, which you can imagine as a highway with tens of thousands of lanes. The head writes from beginning to end along one set of tracks, then repositions and writes back in the opposite direction.

The latest LTO-10 has 15,104 data tracks, and the drive can read and write 32 tracks simultaneously, continuously increasing capacity through more precise materials and servo control technology.

Moreover, tape capacity growth is far from over.

In 2020, IBM and Fujifilm achieved a magnetic recording density of 317Gb per square inch in the laboratory, demonstrating the technical potential for a single tape cartridge to reach 580TB in the future, equivalent to 14.5 times the current 40TB commercial product.

Of course, 580TB remains at the laboratory demonstration stage, and there is still a long way to go before commercialization.

Tape also has a long-term cost that is often overlooked: compatibility.

Tape media can be preserved for many years, but that does not mean a new drive decades later will still be able to read it. The latest LTO-10 drive can only read and write LTO-10 tapes, so enterprises need to retain old equipment or regularly migrate historical data to new media.

For data centers managing tens of thousands of tape cartridges, data migration, verification, and equipment maintenance are likewise considerable expenses.

Even so, in large-scale cold data archiving scenarios, tape still has strong cost and energy-efficiency competitiveness. Fujifilm's decades of accumulated precision coating, thin-film materials, and magnetic particle technologies have therefore regained commercial value in the AI era.

The story of tape is also playing out in the mechanical hard drive industry.

In January this year, Western Digital revealed that the company's hard drive production capacity for calendar year 2026 was basically sold out, with long-term purchase agreements from some large customers already extending to 2028.

Seagate's situation is even more extreme. According to its late-October earnings call, the vast majority of the company's nearline mechanical hard drive shipment capacity has been allocated through long-term agreements to 2028, and some cloud service providers' purchase agreements even cover through 2030.

More noteworthy is that mechanical hard drives are not only selling more, but prices are also rising.

The reason is not complicated. SSDs far outperform mechanical hard drives in random read/write performance, but for cloud service providers that need to keep massive amounts of data online for the long term, mechanical hard drives still have a cost-per-TB advantage.

In particular, as the AI industry continues to expand and training data, model files, and various types of generated content keep accumulating, data centers need not only faster SSDs but also mechanical hard drives that can provide tens of PB and hundreds of PB of capacity at a reasonable price.

Of course, HDDs also have performance and maintenance costs. As per-drive capacity continues to increase, random access capability does not improve proportionally, and data rebuild time after a failure may also lengthen.

But for cloud service providers, as long as storage cost, capacity density, and access performance can meet business needs, mechanical hard drives still have value in existing.

From Fujifilm's announcement of a fivefold capacity expansion, to Western Digital's full-year capacity being basically sold out, to Seagate signing long-term agreements with cloud service providers extending to 2030, a group of traditional technologies that have gradually lost relevance in the consumer electronics market are finding new growth space in AI data centers.

However, tape may also face new competitors in the future.

In February 2026, Microsoft Research published the latest results of Project Silica in Nature. Researchers used femtosecond lasers to write data inside glass, achieving a storage capacity of 4.8TB in glass about 12 centimeters square and 2 millimeters thick.

Based on accelerated aging tests, the researchers estimate that the data could be preserved for more than ten thousand years. Although there is still a distance before large-scale commercial application, it demonstrates another possibility for long-term archiving.

On one side, Fujifilm is still improving the magnetic powder coating process that has continued for decades, enabling a small tape cartridge to hold tens of TB of data; on the other side, Microsoft has begun trying to use lasers to write information into glass, much like ancient humans carved characters into stone.

While the whole world is chasing more powerful GPUs and smarter large models, those old technologies responsible for preserving data have instead ushered in their own golden age.

The spotlight has never belonged only to new things, but also to those old crafts that find their place in new trends.

Source

Phoenix Technology