Tiangong Tianxin, founded by Academician Zhang Yue's team at USTB, completes tens of millions of yuan in seed funding
Two-dimensional semiconductor company Tiangong Tianxin has completed a seed round of tens of millions of yuan, with investment from CAS Star and Inno Fund; the funds will be used for team building, wafer production capacity construction, and commercialization of technological achievements. The company was founded in May 2026 and originates from the team of Academician Zhang Yue at the University of Science and Technology Beijing. It has achieved the preparation of 2-inch single-layer molybdenum disulfide single-crystal wafers, with a material thickness of approximately 0.65 nanometers, a device yield of over 96% at the centimeter scale, and has completed the development of 8-inch equipment and process development.
Body · AI translation
Author | Qiu Xiaopei
Editor | Yuan Silai
Hardcore Tech has learned that the two-dimensional semiconductor company Beike Tiangong Tianxin (Beijing) Technology Co., Ltd. (hereinafter referred to as "Tiangong Tianxin") recently completed a seed round of financing in the tens of millions of yuan, with investment from CAS Star and Inno Fund. This round of funds will mainly be used for team building, wafer production capacity construction, and the transformation of technological achievements.
"Tiangong Tianxin" was founded in May 2026. It is a technology achievement transformation project of Academician Zhang Yue's team at the University of Science and Technology Beijing, focusing on connecting the technology chain of two-dimensional semiconductors from material production to chip manufacturing.
Tiangong Tianxin
Among them, Zhang Yue, an academician of the Chinese Academy of Sciences, serves as chief strategic scientist; co-founder and CTO Zhang Zheng is a professor at the University of Science and Technology Beijing and a recipient of the National Science Fund for Distinguished Young Scholars. In addition, the company has also recruited industry talent from leading integrated circuit enterprises.
Two-dimensional semiconductors are one of the new material directions that the global semiconductor industry has focused on exploring in recent years.
Over the past few decades, the continuous improvement of chip performance has mainly relied on the scaling down of transistor dimensions. However, as advanced processes advance toward 2 nanometers and smaller nodes, traditional silicon-based transistors face physical limitations such as short-channel effects and increased leakage, and the technical difficulty and manufacturing cost of further shrinking dimensions continue to rise.
For this reason, two-dimensional semiconductors are regarded as one of the potential solutions to continue Moore's Law. Silicon channel materials represented by molybdenum disulfide and tungsten diselenide can reach a thickness of a single atomic layer, which is not only expected to improve the leakage problem of transistors at extremely small dimensions and reduce chip power consumption, but also has the potential to be compatible with existing silicon-based manufacturing processes, without completely overturning existing production lines and equipment systems.
In the past, two-dimensional semiconductors remained in the academic research stage for a long time. In the past two years, one obvious change is that leading global semiconductor companies have begun to accelerate their layout.
For example, companies such as IMEC and TSMC are continuing to advance research on two-dimensional semiconductor transistors and wafer-level integration; Samsung is also exploring the production of large-size molybdenum disulfide materials; Intel has also included two-dimensional semiconductors in its future advanced device research directions. With deep participation from the industry side, the landing time of two-dimensional semiconductors is faster than the outside world expected. In the next two to three years, the scale of transistors will show order-of-magnitude growth, and functions and performance will also show huge breakthroughs.
Image provided with corporate authorization
Zhang Zheng, co-founder and CTO of "Tiangong Tianxin," told Hardcore Tech that two-dimensional semiconductors are the most competitive new material for future processes below 1nm and are expected to be applied first in fields such as edge computing, compute-in-memory, sensing-compute-memory integration, and space computing power.
However, it is not easy for two-dimensional semiconductors to truly enter mass production of advanced-process chips. The first challenge is the preparation of large-size, high-quality wafers—to uniformly cover the entire wafer with atomic-level thickness material while ensuring consistency in crystal quality, defect density, and device performance, the difficulty increases significantly.
Therefore, one of the core technologies of "Tiangong Tianxin" is the team's original two-dimensional molten confinement "Zhang growth method." According to reports, this technology uses molten glass-assisted growth to achieve the preparation of large-size single-crystal two-dimensional semiconductor materials. The team's related results were published in Nature Materials in 2025.
According to company disclosures, the team has achieved the preparation of 2-inch single-layer molybdenum disulfide single-crystal wafers, with a material thickness of about 0.65 nanometers, a device yield of more than 96% within the centimeter-scale range, and the team has recently completed the development of 8-inch equipment and process development.
Image provided with corporate authorization
However, material growth is only the first step. For two-dimensional semiconductors to truly enter the chip industry, a series of issues still need to be solved, including material transfer, metal contacts, etching, dielectric layer integration, and compatibility with existing silicon-based processes.
To this end, the team has accumulated long-term experience in these areas. Specifically, at the transistor level, the team originally proposed the idea and method technology of atomic layer bonding, and for the first time developed two-dimensional transistor devices that meet the thermal budget requirements of back-end integration processes. All performance indicators comprehensively exceed the requirements of the International Roadmap for Devices and Systems (IRDS), strongly promoting the development of two-dimensional semiconductor devices from the laboratory to engineered manufacturing. This achievement was selected as one of the Top 10 Advances in Chip Science in China in 2025.
Image provided with corporate authorization
At the circuit architecture level, the company proposed a new Pseudo-CMOS architecture and, through new device and circuit design methods, developed low-power logic operation units.
According to research results disclosed by the company, the team has developed two-dimensional semiconductor logic circuits with power consumption only about 2% of similar silicon devices.
Compared with single-point technological breakthroughs, "Tiangong Tianxin" emphasizes full-process manufacturing capabilities. At present, the team relies on the 6-inch two-dimensional semiconductor R&D platform built by the University of Science and Technology Beijing and China's first 8-inch two-dimensional semiconductor pilot production line to establish a collaborative R&D mechanism.
Among them, the 6-inch platform mainly undertakes material, device, and process R&D, while the 8-inch pilot line is oriented toward wafer manufacturing, process integration, and small-scale mass production verification.
According to reports, the single-equipment capacity of "Tiangong Tianxin" 8-inch MOCVD molybdenum disulfide and tungsten diselenide wafers is about 15 wafers per day. The next step will focus on improving material size, batch stability, and production efficiency.
In terms of business model, in the future, "Tiangong Tianxin" plans to provide industrial customers with large-size wafers, dedicated production equipment, process development, and related technical services. It is understood that the team has already carried out technical cooperation and exchanges with industrial enterprises such as Tsinghua Unigroup and Huada Empyrean.
In the longer term, "Tiangong Tianxin" also hopes to explore an open foundry business and ultimately form an IDM platform covering materials, processes, design tools, and chip manufacturing.
Regarding the long-term prospects of two-dimensional semiconductors, Zhang Zheng also holds a relatively cautious judgment. He believes that 2D semiconductors are not intended to fully replace silicon-based chips, but rather to integrate with existing silicon-based processes and achieve breakthroughs in some key materials and device segments.
The following is the exchange between 36Kr and Zhang Zheng (lightly edited)
HardKr: What are the current industry trends in 2D semiconductors?
Zhang Zheng: At present, there are mainly two directions for technology routes in the industry. One is 3D integration, such as Chiplet, HBM, etc., which is equivalent to building the house taller to give chips stronger computing power. The other direction is to continue shrinking the size of each transistor, that is, process scaling.
However, the future development of integrated circuits faces the limit of size scaling. In the process of continuous size reduction, silicon materials have encountered an insurmountable bottleneck: their thickness is difficult to reduce below 6 nanometers. At this point, new materials are needed to continue the development trend of existing silicon materials and extend Moore's Law. 2D semiconductors naturally become an important layout direction for the future.
TSMC, Samsung, Intel, and this year Tokyo Electron have all proposed in their own technology roadmaps that 2D semiconductor materials should be used as a key node in future processes.
HardKr: After the silicon channel material is replaced with 2D semiconductors, what effects will this bring?
Zhang Zheng: The main challenge silicon materials face in the process of size scaling is that a larger voltage is needed to drive them in order to obtain better current. This brings greater power consumption, while also generating more leakage current, and static power consumption will also be relatively high.
One of the biggest advantages of 2D semiconductors is that static power consumption is extremely low. Its leakage current level is about 1/1000 that of silicon, and the resulting static power consumption performance can be more than 10 times lower. For future high-computing-power chips, this power consumption advantage will be very significant.
The second advantage is that the material itself has a van der Waals heterostructure. Unlike traditional materials, which mainly combine with substrates and other materials through chemical bonds such as covalent bonds and ionic bonds, it forms structures through van der Waals forces.
The benefit brought by this mode of interaction is ease of integration. Its integration with traditional processes does not rely entirely on epitaxial growth; it is more like building with Lego blocks, which can be assembled layer by layer to achieve three-dimensional or vertical integration. This makes it easier to be compatible with existing processes during integration.
HardKr: What difficulties exist in the actual implementation of 2D semiconductors?
Zhang Zheng: 2D semiconductors involve adjustments to the channel material, which is equivalent to changing things from the very source of the entire chip manufacturing process. The thousands of subsequent processes all need adaptive adjustments. Integrated circuits themselves are a closed-loop R&D system, including materials, equipment, processes, standards, and design. To complete this closed loop, verification must be carried out one by one at different process nodes, so the R&D cycle itself will be relatively long. I have always described the industrialization development of this field as advancing in waves and rising in a spiral.
HardKr: In the future, in which chip fields will the most valuable application scenarios for 2D semiconductors be found?
Zhang Zheng: The ultimate goal is certainly computing chips with advanced processes, that is, logic chips. This is the ultimate application scenario for 2D semiconductors.
But in recent years, we will also have some phased application opportunities. The biggest advantages of 2D semiconductors are low power consumption and ease of integration. Therefore, in the short term, edge computing, sensing-memory-computing integration, and other fields may have relatively large application space.
Another relatively large application scenario is space computing chips. 2D semiconductor materials are only one atomic layer thick, and radiation particles in the universe can pass directly through the material without being trapped inside the 2D semiconductor. It has very strong radiation resistance.
HardKr: What is the relationship between 2D semiconductors and silicon-based technology? In the future, will they replace silicon or form a complement to silicon?
Zhang Zheng: My teacher, the chief scientist of our team, Academician Zhang Yue, has always emphasized that "2D semiconductors are not meant to replace silicon. We need to take a new track of integration with silicon-based technology and compatible development with silicon-based technology." In future computing chips, both 2D semiconductors and traditional silicon-based materials will play important roles. They can form a good complement and jointly form the technological foundation of the artificial intelligence era.
end