ADI Discusses the Motion Foundation of Humanoid Robots: Real-Time Motor Control and Multi-Turn Absolute Position Sensing
ADI points out that humanoid robots integrate dozens of degrees of freedom across the entire body, and joint errors or delays can propagate throughout the body; therefore, motion must be built on real-time motor control. Its ADMT4000 can achieve multi-turn non-contact absolute position tracking without power supply, eliminating the need for external linear sensors or backup batteries; the TMC6460, meanwhile, integrates real-time control loops, current sensing, and motion control into a compact architecture, enabling low-latency execution at the joint level.
Body · AI translation
Add crowdsourcing promotion copy Add crowdsourcing promotion copy end Add App-exclusive traffic guidance
People evaluate humanoid robots often by their motion performance: whether their steps are light and fluid, whether they can adapt on the fly during movement, and whether their posture adjustments are seamless. What is truly impressive is not how much strength they have or how fast they can run, but the coordination among their degrees of freedom (DoF).
Modern humanoid robots integrate dozens of degrees of freedom throughout the body. Each degree of freedom enhances capability but also adds complexity. The more joints there are, the more frequent the interactions, the tighter the coupling, and the greater the risk of instability. Fluid motion is no longer the result of a single command, but an emergent behavior spanning the entire system.
For this reason, the motion of humanoid robots must be built on the foundation of real-time motor control.
High degrees of freedom make it possible for humanoid robots to achieve human-like motion: continuously adjusting posture, stabilizing manipulation, and maintaining balance under disturbances. But coordination overhead rises rapidly. An error or delay in a single joint is not confined locally but propagates throughout the body. A delay in ankle correction affects knee torque, a wrist disturbance is transmitted to the shoulder, and a torso adjustment affects overall balance. Figure 1: Humanoid robots: an overview of degrees of freedom
Humanoid robots need to continuously regulate force, torque, current, and position to counter gravity, inertia, friction, and external disturbances. Tiny timing errors can cascade into oscillation or instability, making even standing still a problem that requires active control.
In high-DoF systems, small efficiency losses at each joint accumulate and quickly manifest as a significant system burden. Effective motor control depends on:
· High-fidelity current sensing for smooth torque control
· Low-noise integrated motor control loops for stable fine-tuning
· Efficient and compact motor control architectures to reduce thermal constraints and space limitations
Achieving this kind of continuous regulation requires highly integrated motor control at the joint level. Modern humanoid robots increasingly rely on compact real-time motor control solutions that integrate current sensing, control loops, and motion sequencing into a single architecture. Solutions such as the ADI motor control platform can achieve deterministic torque and speed control with extremely low latency, helping maintain stability even as system complexity increases. As humanoid robot designs pursue higher joint density without increasing system size or power budget, tight integration becomes increasingly critical.
Precise control begins with accurate joint position sensing. Humanoid robots rely on absolute position detection for rotary actuators (hips, shoulders, head) and linear actuators (elbows, knees, ankles, fingers).
Determinism at this level increasingly requires multi-turn absolute position detection. Technologies such as ADMT4000 can achieve multi-turn non-contact tracking without power supply, and when used with single-turn sensors can eliminate external linear sensors or backup batteries while reducing actuator size, weight, and system complexity.
Crucially, absolute position sensing remains effective after power loss. Each joint can retain its own state, enabling the control loop to resume operation deterministically from the first cycle without homing or fallback behavior; for complex systems, this is the foundation for rapid response and reliable operation. Figure 2: Multi-turn magnetic sensing in a tendon-driven humanoid arm
Such corrections do not need to wait for central decision-making. Learned policies can define motion intent, but stable execution depends on deterministic motor control loops.
Motor control is the key link through which system functions are implemented in servo drives, joint modules, and embedded controllers, translating digital commands into smooth and safe motion. Highly integrated motor control solutions such as ADI Trinamic TMC6460 can play a key role in this process. By integrating real-time control loops, current sensing, and motion control into a compact architecture, such solutions can achieve precise low-latency execution at the joint level. Combined with reliable position feedback, they can provide the deterministic foundation needed to coordinate dozens of joints and ensure stable timing.
Humanoid robots will continue to advance in perception, connectivity, and high-level policies, but without precise execution, none of it matters. The key to intelligent motion is not the number of degrees of freedom, but how effectively those degrees of freedom are controlled and synchronized, truly achieving reliability with confidence.
To this end, all levels (motor control, position sensing, and embedded intelligence) need to operate in sync, delivering stable and predictable motion control in real time.
This is the cornerstone of intelligent motion: steady steps, steady progress, and lasting success. Statement: This is an exclusive article from Sina.com. Reproduction without authorization is prohibited. tech_web_article_v2015_block_bottom Non-targeted 300*250 button 17/09 wenjing begin
Non-targeted 300*250 button end