DeKrypton Microelectronics launches millimeter-wave ultra-high-speed interconnect solution targeting connections within 10 meters in AI data centers
DeKrypton Microelectronics has launched an ultra-high-speed interconnect solution based on millimeter-wave chips. Its single-channel PAM4 112Gbps chip has completed tape-out and been lit up, with plans to provide samples to customers in early 2027. The solution targets intra-rack and inter-rack connections within 10 meters in AI data centers. The OSFP interface 800Gbps solution aims for a total power consumption of approximately 9.6W at both ends, and the per-channel rate will subsequently be increased to 224Gbps and 448Gbps.
Body · AI translation
DeeKe Wei launches millimeter-wave ultra-high-speed interconnect solution, targeting connections within 10 meters in AI data centers. Source: Bandao Zongheng. Published: 2026-11-16 16:17. Data center computing power generates the poster. Single-channel rate reaches 112Gbps; the 800Gbps solution targets total power consumption of about 9.6W at both ends, providing a new option for short-distance high-speed interconnect in AI data centers.
Competition in AI data centers is extending from chip computing power to system interconnect. The performance of computing chips such as GPUs and ASICs continues to improve, more accelerators need to be connected within racks, and massive amounts of data must also be exchanged between racks. As transmission rates increase, it becomes harder to balance the power consumption, cost, and transmission distance of interconnect links. Copper cables, optical modules, and solutions such as NPO and CPO are all accelerating their evolution, and short-distance high-speed connections have also become a new point of technological competition.
Recently, DeeKe Wei Electronics launched an ultra-high-speed interconnect solution based on millimeter-wave chips. The company said that its self-developed single-channel PAM4 112Gbps millimeter-wave ultra-high-speed interconnect chip has completed tape-out and lighting-up and demonstrated its functions, and is planned to be sent to customers for sample testing in early 2027. The new solution targets high-speed connection scenarios within 10 meters, such as vertical interconnect within racks (Scale-up) and horizontal interconnect between racks (Scale-out) in AI data centers, and hopes to provide a new option beyond copper interconnect and optical interconnect.
Between copper cables and optical modules, there is still room for short-distance interconnect
Scale-up mainly connects computing resources such as GPUs and accelerator cards within the same cabinet, emphasizing high bandwidth and low latency, while Scale-out is responsible for connecting different cabinets so that more computing nodes can form large clusters, with greater transmission distance and number of connections.
Copper interconnect still has advantages in short-distance scenarios, with relatively low cost, mature links, and good power consumption and latency performance. However, as transmission rates continue to increase, copper cables are also gradually facing physical performance limits.
Among these, the skin effect is an important factor affecting the performance of high-speed copper interconnect. As signal frequency increases, current gradually concentrates near the conductor surface, the effective conductive cross-sectional area decreases, and AC resistance increases, thereby bringing greater signal loss. At the same time, dielectric loss also further aggravates high-speed signal attenuation, limiting the transmission distance that copper cables can support. In addition, the weight of copper cables and cabling space also put pressure on large AI data centers.
In contrast, optical interconnect can cover longer distances and higher bandwidth, but optical modules involve lasers, optoelectronic conversion devices, as well as driver and signal processing chips, making the system structure and cost relatively complex. For short-distance connections inside cabinets and between adjacent cabinets, the industry is still looking for solutions with a better balance of power consumption, cost, and transmission distance.
Converting electrical signals into millimeter-wave RF signals for transmission
The core of DeeKe Wei's solution is to change the way data is transmitted in the link. At the transmitting end, a millimeter-wave chip converts electrical signals into millimeter-wave RF signals, which are then transmitted through a waveguide medium to the receiving end, and finally the receiving-end chip restores the RF signals to electrical signals.
The waveguide medium here is an important part of the solution and is responsible for millimeter-wave signal transmission. It should not be simply understood as signal propagation in open space in ordinary wireless communication; both ends of the link still require chips to complete the conversion between electrical signals and RF signals, using the millimeter-wave frequency band and waveguide structure to achieve short-distance high-speed transmission.
In terms of chip design, DeeKe Wei says its product integrates a lightweight SerDes internally and supports signal shaping, so it does not need to use a complex digital signal processor (DSP). SerDes is responsible for transmitting and receiving high-speed serial data, while signal shaping is used to improve link quality. Reducing complex processing steps is expected to lower link latency and power consumption, and can also reduce the system complexity brought by optical devices.
In terms of product form, the company has planned an interconnect solution based on the OSFP interface, which can support different total bandwidth configurations such as 800Gbps, 1.6Tbps, and 3.2Tbps according to single-channel rate and number of channels. Application scope includes intra-cabinet and inter-cabinet interconnect within 10 meters, as well as server backplane connectors. The company also proposed that it can later extend to advanced packaging architectures such as near-packaged optics (NPO) and co-packaged optics (CPO).
The 800G solution targets power consumption of about 9.6W, with single-channel rates continuing to increase
Power consumption is an important metric for data center interconnect. DeeKe Wei disclosed that its OSFP interface 800Gbps solution based on its millimeter-wave chip targets total power consumption of about 9.6W at both ends, with a chip service life design target of more than 100,000 hours. The system also uses a millimeter-level coupling structure to simplify module alignment and assembly.
These metrics reflect the design direction of the solution: within a connection distance of 10 meters, reduce complex signal processing and optoelectronic devices, control link power consumption and system cost, while striving to cover longer distances than traditional copper cables. However, 9.6W and 100,000 hours are currently target metrics announced by the company, and actual performance still needs to be verified through customer testing and system operation.
In terms of the product roadmap, the company plans to increase the single-channel transmission rate from 112Gbps to 224Gbps and 448Gbps, driving the total bandwidth of the OSFP solution toward upgrades of 1.6Tbps and 3.2Tbps. Among them, the single-channel 224Gbps millimeter-wave ultra-high-speed interconnect chip is planned to tape out in the first half of 2027. After the rate increases, chip signal integrity, waveguide transmission loss, coupling efficiency, and system heat dissipation will all face higher requirements, and SerDes technology will also need to iterate accordingly.
Commercialization still needs to go through system verification
From the perspective of industry development, data center interconnect is adopting different technologies according to distance and bandwidth requirements. Marvell maps short-distance copper interconnect, active cables, and optical interconnect to different transmission distances; TrendForce also points out that as AI cluster scale expands, the transmission distance of copper cables at higher rates is limited, and the application space for optical interconnect and CPO increases accordingly. Different routes will coexist for a long time, each undertaking suitable link tasks.
What DeeKe Wei's millimeter-wave solution targets is precisely short-distance high-speed links within 10 meters. Whether it can become market-competitive depends on whether it can provide more attractive overall metrics in scenarios where copper cable distance is insufficient and optical modules face greater cost or power consumption pressure.
Founded in 2021, DeeKe Wei has laid out three product lines: millimeter-wave wireless connection, millimeter-wave wireless isolation, and millimeter-wave ultra-high-speed interconnect, and has completed multiple rounds of financing. The completion of tape-out and lighting-up of the 112Gbps chip this time means that the company has further extended millimeter-wave technology to high-speed interconnect in AI data centers. Next, customer sampling in early 2027 and progress on the 224Gbps chip will become key nodes for observing the commercialization progress of this technology route.
This article is reproduced from media reports or online platforms and represents the author's personal position or views. Our reproduction is solely for sharing and does not mean that we approve of or agree with it. If the source is marked incorrectly or your lawful rights and interests are infringed, please contact customer service in a timely manner, and as a neutral platform service provider we will promptly correct, delete, or handle it in accordance with the law. Comments: No user comments yet. Latest News More Related Recommendations
NVIDIA RTX 5090 returns to the market: 21 models on sale 2026-11-16 16:48
TV shipments continue to face pressure, high-end routes diverge and race ahead 2026-11-16 16:45
MEMS switches restructure routing, resisting reverse analysis of package substrates 2026-11-16 16:31